Click image to view full size image
Humidity Control Unit
1. Dehumidifying principle: Adopt high performance cellular adsorption wheel,divided into moisture absorption area and regeneration area.When wheel rotates,moisture in the air adsorb in the wheel micro hole,make dry air into the indoor.When the moisture absorption wheel rotates to regeneration area,at this time,regeneration air(warm air) from reverse direction will drive moisture(wet air) absorption of the wheel to outdoor.Wheel repeat moisture absorption and regeneration action,has no influence on air flow,can continuously provide dry air for indoor.
2.Specification:
Type |
MY-350P |
MY-450P |
MY-550P |
Dehumidifying capacity Kg/h |
1.2 |
2.5 |
3 |
Wind capacity m3/h |
250~350 |
350~450 |
450~550 |
Weight Kg |
40 |
48 |
50 |
Dimension (L*W*H,mm) |
660*480*365 |
770*525*410 |
810*525*410 |
Power KW |
2.38 |
3.3 |
4. |
3.Environmental conditions:
There is no condensed water because of dry dehumidification method,so dry dehumidifier can work at temperature -30°C~60°C.
4.Lower humidity: Relative humidity can reach less than 1% for some special needs because of adsorption dehumidification.
5.Environmental protection and energy saving:
Reach dehumidification purpose without any cold medium,save energy consumption.
6.Application:
Apply to family,basement,warehouse,port crane tower room,bridges,metal rust, electric control room,brewing,chemistry,chemical engineering,electronics,food, pharmaceutical,film,electronic,food,leather,military equipment, precision components,seeds,sugar,packaging,dairy products, fertilizer,tea,coffee, hygroscopic powder and other occasion.
